Alientech k-tag k tag tool User Guide
Alientech k-tag master k tag tool User Guide
Alientech k-tag is obd2 ecu programming tool. k tag tool new update version With the tokens fix adapter, and solve the tokens limit problem, you can use if for unlimited times. Below OBD2Tuning sharing Alientech k-tag master User Guide.
Ktag k-tag ecu programming tool K TAG Master ktag tuning tool
Alientech k-tag master k tag tool User Manual:
Step 1: Connect the K-TAG ECU Flasher to the diagnostic OBD-II 16pin port located under the dash panel of your car. Verify that the ignition switch is turned off.
Step 2: Install the software of K TAG ECU Programming Tool, after the "found the new hardware" message appears on the screen.just install the drive correctly,
Step 3: Press the "Yes" button after the software displays the "Read the ECU " message.
Step 4: Turn off the ignition switch. and press the "Write the ECU" Button on the software, after the "YES" message prompt to start the initialization of the car computer memory(ECU).
Step 5: Turn on the ignition switch after the "succeed" message appears.
Step 6: Close the software , and "Do Not Turn Off your car"
Step 7: Turn off the ignition switch and disconnect the KTAG ECU programmer from the diagnostic port.